Fda Certified KN95 DisposableMask , KN95 Air Mask Melt Blown Fabric Safety

High Quality Factory Price Fda Certified Kn95 3d Disposable Face Mask Stock With Melt Blown Fabric

1. Face the side of the mask without nose clip, and hang the ear with both hands on one side , so that nose clip is located above the mask.
2. Put a mask under your chin.
3.Pull the band behind the ear and adjust the banduntil it feels comfortable.
4.Place the fingers of both hands in the middle of the metal nose clip and press inwards,moving the fingertips along the clip to the sides until the clip is fully pressed into the shape of the bridge of nose.

1 . Descriptions

FFP2V Foldable Mask :High efficiency efficiency (99%) for high risk hazards. Handy sized and easily pocketed these individually packed masks hygienically fold flat when not in use. Ergonomically shaped for an efficient fit. Conforms to EN149:2001+A1:2009.

Large surface area ensures very low breathing resistance
New large exhalation valve which reduces heat build-up and improves wearer comfort
Colour coded alphamesh shell for ease of identification
Adjustable headstrap allows for a secure and comfortable fit
Metal-free - suitable for food industry applications
Preformed nosebridge eliminates the need for regular adjustment
Compatible with a wide range of safety eyewear
Feature:

Anti coronavirus, anti dust and virus.
Dispsoable Great elasticity face mask, size: 17.5x9.5cm, 3-PLY.
Non woven face mask is made of spunbonded non woven fabric and meltblown non woven fabric
Low respiratory resistance, no odor, no irritation.
Use ultrasonic welding technology, comfortable wearing, breathable, hygienic, and biodegradable.

2 . Certification
This product has been tested according to the following European Standard:
EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.EU type examination certificate (module B) issued by BSI , notified body CE0086.
The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals set out in Annex VII under surveillance of BSI , notified body CE0086.

3. Directions for use
The mask is for single use only.
The mask should not be removed from its packaging until its required for use.
Use the respirator in accordance with applicable health and safety regulations.
Fit the respirator and check leak-tightness before entering the contaminated area.
Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.